FREQUENTLY ASKED QUESTIONS

FAQ

Hard water is caused by minerals containing calcium and magnesium which are dissolved in the water supply. The more dissolved minerals of this type there are in the water the harder the water is. When the water is heated (or evaporates) these minerals are left behind and form scale.

By removing the scale forming minerals from the water a softener benefits everywhere you use water in the home. Washing and laundry becomes easier with less use of shampoos and washing powder (up to 50%) and softer luxury feeling clothes and towels. With no scale in the water your washing machine, water boiler and central heating will work more efficiently and be less prone to breakdown. As a softener will over time remove existing scale your fuel bills will also benefit . Lastly with no ‘scum’ or scale residue on worktops and shower screens and no blocked shower heads, cleaning becomes less arduous.

Go to this page and type in your nearest town. The widget will display how hard your water supply is.

Normally, it is fitted somewhere close to your water main stopcock. If the stopcock is under your kitchen sink, this is generally the most cost effective solution. The softener needs to have a power supply and be connected to a drain for use during regeneration.

A good water softener should last you up to 10 – 12 years. Our 8 year warranty programme covers all parts and labour should it malfunction during this time. All we ask is that your softener is serviced once every two years.

This varies depending on your water usage. The more often a softener regenerates, the more often you will need to add salt. We recommend you check your water softener’s salt level once a month. If your salt levels are down to 2 centimetres refill it to the top with salt tablets.

Yes , however it is not recommended for either nursing mothers or anyone on a sodium restricted diet. In the process of softening the water, the hard elements of calcium and magnesium are replaced with sodium.

When connecting a softener to your home, there are 2 ways to tackle the drinking water scenario. Firstly, the cold tap in the kitchen can be left unsoftened receiving water direct from your water main. Secondly, to have a separate untreated tap solely for drinking water and to have this fitted with a water filter which will remove chlorine and taste and odour, to give you clear tasting filtered water. (Please see our section on drinking water kits)

Metered softeners measure the amount of water used and ensures the softener will only regenerate when required, thus minimising the use of salt. It will also notice any increase or decrease in water usage (while you are on holiday for example) again saving on regeneration time and salt usage.

The short answer is yes. The softener is usually installed with a ‘by pass’ that enables the softener to be isolated for servicing etc. by turning this on the softener can be removed like any other kitchen appliance. However you may want to use the benefits of the softener as a selling tool for your old house and use the additional money to have a new one fitted in your new house.

As soon as your new softener is connected, soft water will start to reverse the scale build up. Over a period of time all scale build up will be gradually removed. As this happens, your water heating bills will be reduced simply because you will not be heating your water through a barrier of scale.